Why does my Miele KM 7360 FR Hob keep switching off?
If a cooking zone or the entire Miele Hob switches off automatically, it's likely that the overheating protection mechanism has been activated. Allow the hob to cool down. You should also rectify the causes of the overheating and check that the hob is working. If the issue persists, contact the Customer Service Department.
Why is my Miele KM 7360 FR Hob making noise after I turn it off?
If you hear an operating noise from your Miele Hob after it's switched off, it's the cooling fan running until the hob cools down. It will switch off automatically.
Why does my new Miele Hob smell when I use it?
When a new Miele Hob is used, a smell and vapors might be emitted due to a protective coating on metal components and the material of the induction coils. This odor will reduce with each use and is not hazardous.
Why does my Miele KM 7360 FR cooking zone turn off by itself?
If a cooking zone on your Miele Hob switches off automatically, it may have been operated for too long. Switch the cooking zone back on.
Why isn't my Miele Hob's auto heat-up working?
If food isn't heating up with the Auto heat-up function on your Miele Hob, it could be due to a large amount of food being heated or the pan not conducting heat well. Start cooking at the highest power level and manually reduce it later, or use a pan that conducts heat properly.
Why does Miele KM 7360 FR Hob reduce power level 9 automatically?
If the power level 9 is automatically reduced on your Miele Hob when you set power level 9 for the connected cooking zone, it's because operating both zones at that level exceeds the maximum power allowed for the two zones. Use a different cooking zone.
Why does the Booster level on my Miele Hob turn off early?
If the Booster level on your Miele Hob deactivates automatically, the overheating protection mechanism may have been activated. Allow the hob to cool down. Rectify the causes of overheating and check that the hob is working. If the problem persists, contact Customer Service.
Why won't my Miele Hob heat up after turning on?
If '??' appears briefly in the timer display of your Miele Hob after switching it on, and the cooking zones don't heat up, the hob is likely in demonstration mode. To exit this mode, touch the '?' and '?' sensor controls simultaneously until '??' flashes alternately with '???' in the timer display.
Why are the sensors on my Miele Hob not working properly?
If the sensors on your Miele Hob are overly sensitive or not responding, the sensitivity level may have changed. Ensure no direct light (sun or artificial) is shining on the hob and that nothing is covering the sensors. Interrupt the power supply to the hob for about 1 minute. If the problem continues after restoring power, contact Miele.
What to do if my Miele KM 7360 FR won't switch on?
If your Miele Hob won't switch on, first check if the circuit breaker has tripped. Also, there may be a technical fault, in which case disconnect the hob from the electricity supply for approximately 1 minute. If the hob still won't turn on, contact a qualified electrician or the Miele Customer Service Department.
General| Appliance category | Hob |
|---|---|
| Hob type | Induction |
| Type | Built-in |
| Number of Cooking Zones / Burners | 4 |
| Color | Black |
| Weight | 14 kg |
| Depth | 52 cm |
| Safety Features | Overheating protection |
| Burner types | Induction |
| Material | Ceramic glass |
To Next Page
