What to do if '?' flashes on Miele KM 7474 FR timer display and it switches off?
If '?' flashes in the timer display and the Miele hob switches off automatically, it means that one or more of the sensor controls are covered, for example, by finger contact, food boiling over, or an object. Clean off any soiling and/or remove the object.
Why does '???' appear in the timer display of my Miele KM 7474 FR?
If '???' appears in the timer display of your Miele hob, it indicates that either the system lock or the safety lock is activated. To resolve this, deactivate the system lock or the safety lock.
What to do if '??' appears on Miele KM 7474 FR timer display?
If '??' appears briefly in the timer display and the cooking zones do not heat up, the Miele hob is in demonstration mode. To exit demonstration mode, touch the '?' and '?' sensor controls at the same time until '??' flashes alternately with '???' in the timer display.
General| Number of ovens | 1 |
|---|---|
| Hob type | Zone induction hob |
| Frame type | Full trim |
| Frame color | Stainless steel |
| Product color | Black |
| Hob width size | 80 cm |
| Top surface type | Glass-ceramic |
| Appliance placement | Built-in |
| Cooking zone 1 type | Large |
| Cooking zone 2 type | Simmer |
| Cooking zone 4 type | Regular |
| Cooking zone 1 boost | 3000 W |
| Cooking zone 1 power | 2300 W |
| Cooking zone 2 boost | 1700 W |
| Cooking zone 2 power | 1400 W |
| Cooking zone 3 power | 2100 W |
| Flexible cooking zone | Yes |
| Cooking zone 1 position | Left front |
| Cooking zone 2 position | Middle rear |
| Cooking zone 3 position | Right rear |
| Cooking zone 4 position | Right front |
| Large cooking zone shape | Round |
| Cooking zone 2 double boost | 2200 W |
| Cooking zone 2 power source | Electric |
| Cooking zone 4 double boost | 3650 W |
| Cooking zone 4 size (W x D) | 190 x 230 mm |
| Large cooking zone diameter | 220 mm |
| Number of gas cooking zones | 0 zone(s) |
| Regular cooking zone diameter | 160 mm |
| Number of electric cooking zones | 4 zone(s) |
| Number of flexible cooking zones | 1 zone(s) |
| Extra large high-speed cooking zone shape | Rectangular |
| Extra large high-speed cooking zone size (W x D) | 230 x 390 mm |
| Number of power levels | - |
| Extra large high-speed cooking zone | 3400 W |
| Timer type | Digital |
| Control type | Touch |
| Control position | Top front |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | - W |
| Connected load (electric) | 7300 W |
Weight and Dimensions| Depth | 526 mm |
|---|---|
| Width | 806 mm |
| Height | 52 mm |
| Weight | 12000 g |
| Cord length | 1.4 m |
| Installation compartment depth | 500 mm |
| Installation compartment width | 780 mm |
| Installation compartment height | 45 mm |
Defines the intended use and limitations of the hob, including restrictions.
Provides essential guidelines to ensure child safety around the hob during operation and standby.
Covers electrical safety, installation, maintenance, and authorized repairs for user safety.
Outlines safe operating procedures, potential hazards like burns, and proper handling of cookware.
Explanation of features like Booster, Stop&Go, Auto heat-up, and Timer functions.
Describes automatic safety cut-off mechanisms and overheating prevention.
Procedures for unpacking, initial cleaning, and first-time power-on of the hob.
Important safety warnings and precautions to observe during hob use.
How to set, change, and use power levels and PowerFlex cooking zones.
Explains error codes and symbols appearing on the display and how to resolve them.
Addresses issues like sensor sensitivity loss, automatic shut-off, and power level reduction.
Solutions for common problems like the hob not switching on or unusual smells.
Crucial safety warnings regarding electrical connections, damage, and placement.
Minimum clearance requirements for installation above, behind, and to the sides of the hob.
Instructions for connecting the hob to the mains supply, including diagrams and safety.
To Next Page
