What to do if '?' flashes on Miele KM 7474 FL timer display and it switches off?
If '?' flashes in the timer display and the Miele hob switches off automatically, it means that one or more of the sensor controls are covered, for example, by finger contact, food boiling over, or an object. Clean off any soiling and/or remove the object.
Why does '???' appear in the timer display of my Miele KM 7474 FL Hob?
If '???' appears in the timer display of your Miele hob, it indicates that either the system lock or the safety lock is activated. To resolve this, deactivate the system lock or the safety lock.
What to do if '??' appears on Miele KM 7474 FL Hob timer display?
If '??' appears briefly in the timer display and the cooking zones do not heat up, the Miele hob is in demonstration mode. To exit demonstration mode, touch the '?' and '?' sensor controls at the same time until '??' flashes alternately with '???' in the timer display.
General| Number of ovens | 1 |
|---|---|
| Hob type | Zone induction hob |
| Combi zone | Yes |
| Product color | Black |
| Hob width size | 80 cm |
| Top surface type | Glass-ceramic |
| Appliance placement | Built-in |
| Cooking zone 1 type | Large |
| Cooking zone 2 type | Simmer |
| Cooking zone 3 type | Regular |
| Cooking zone 1 boost | 3000 W |
| Cooking zone 1 power | 2300 W |
| Cooking zone 2 boost | 1700 W |
| Cooking zone 2 power | 1400 W |
| Cooking zone 3 power | 2100 W |
| Cooking zone 1 position | Left front |
| Cooking zone 2 position | Middle rear |
| Cooking zone 3 position | Right rear |
| Cooking zone 4 position | Right front |
| Number of cooking zones | 4 zone(s) |
| Large cooking zone shape | Round |
| Cooking zone 1 double boost | 3650 W |
| Cooking zone 2 double boost | 2200 W |
| Cooking zone 3 power source | Electric |
| Cooking zone 4 size (W x D) | 190 x 230 mm |
| Large cooking zone diameter | 220 mm |
| Number of gas cooking zones | 0 zone(s) |
| Regular cooking zone diameter | 160 mm |
| Number of flexible cooking zones | 1 zone(s) |
| Extra large high-speed cooking zone shape | Rectangular |
| Extra large high-speed cooking zone size (W x D) | 230 x 390 mm |
| Number of power levels | - |
| Extra large high-speed cooking zone | 3400 W |
| Timer type | Digital |
| Control type | Touch |
| Control position | Top front |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | - W |
| Connected load (electric) | 7300 W |
Weight and Dimensions| Depth | 520 mm |
|---|---|
| Width | 800 mm |
| Height | 51 mm |
| Weight | 12000 g |
| Cord length | 1.4 m |
| Installation compartment width | 780 mm |
| Installation compartment depth (max) | 524 mm |
| Installation compartment depth (min) | 500 mm |
Defines intended use, limitations, and safety considerations for the hob.
Provides crucial safety guidelines for children's interaction with the hob.
Covers electrical safety, installation hazards, and maintenance risks.
Details safe operating practices and potential hazards during appliance use.
Outlines safe procedures and precautions for cleaning the hob's surfaces.
Explains the function of each sensor control and display element on the hob.
Describes various cooking functions like Booster, Timer, and Auto heat-up.
Critical safety precautions to follow during hob operation.
Essential safety precautions before cleaning the hob.
Explains error codes and symbols appearing on the hob display.
Addresses common issues like sensor unresponsiveness or auto shut-off.
Solutions for cooking performance issues and general faults.
Covers issues like the hob not switching on or unusual smells.
Critical safety warnings and precautions regarding hob installation.
Guidelines for maintaining safe clearances around the hob.
Technical drawings and dimensions for surface mounting hob installation.
Technical drawings and dimensions for flush-fit hob installation.
Instructions and safety precautions for connecting the hob electrically.
To Next Page
