What to do if '?' flashes on Miele KM 7404 FX timer display and it switches off?
If '?' flashes in the timer display and the Miele hob switches off automatically, it means that one or more of the sensor controls are covered, for example, by finger contact, food boiling over, or an object. Clean off any soiling and/or remove the object.
Why does '???' appear in the timer display of my Miele KM 7404 FX?
If '???' appears in the timer display of your Miele hob, it indicates that either the system lock or the safety lock is activated. To resolve this, deactivate the system lock or the safety lock.
What to do if '??' appears on Miele KM 7404 FX Hob timer display?
If '??' appears briefly in the timer display and the cooking zones do not heat up, the Miele hob is in demonstration mode. To exit demonstration mode, touch the '?' and '?' sensor controls at the same time until '??' flashes alternately with '???' in the timer display.
Defines the intended domestic and other similar uses for the hob.
Provides essential safety guidelines for children interacting with or using the hob.
Details safety aspects of installation, maintenance, and electrical connections.
Outlines safe operating procedures and potential hazards during cooking.
Details all sensor controls, displays, and indicators on the hob.
Details various functions like Booster, Stop&Go, Timer, and Keeping Warm.
Explains automatic safety shut-off and overheating protection mechanisms.
Guides through installing the app and connecting the hob to WiFi/WPS.
Highlights critical safety precautions during hob usage.
Explains how to set and change power levels, including extended ranges.
Explains error codes and messages displayed on the hob.
Critical safety warnings and requirements before installing the hob.
Details required clearances above, behind, and to the sides of the hob.
Specifies minimum distances for ventilation underneath the hob.
Technical drawings and dimensions for surface-mounting various hob models.
Technical drawings and dimensions for flush-fitting various hob models.
Details on mains connection, RCDs, circuit breakers, and wiring diagrams.
General| Hob type | Zone induction hob |
|---|---|
| Product color | Black |
| Hob width size | 60 cm |
| Top surface type | Glass-ceramic |
| Appliance placement | Built-in |
| Cooking zone 1 type | Simmer |
| Cooking zone 4 type | Regular |
| Cooking zone 1 boost | 1700 W |
| Cooking zone 1 power | 1400 W |
| Cooking zone 2 boost | 2500 W |
| Cooking zone 2 power | 1850 W |
| Cooking zone 4 power | 2100 W |
| Flexible cooking zone | Yes |
| Cooking zone 1 position | Left rear |
| Cooking zone 2 position | Left front |
| Cooking zone 3 position | Right rear |
| Cooking zone 4 position | Right front |
| Number of cooking zones | 4 zone(s) |
| Large cooking zone shape | Rectangular |
| Simmer cooking zone shape | Round |
| Cooking zone 1 double boost | 2200 W |
| Cooking zone 1 power source | Electric |
| Cooking zone 2 double boost | 3000 W |
| Cooking zone 3 double boost | 3650 W |
| Cooking zone 3 size (W x D) | 190 x 230 mm |
| Number of gas cooking zones | 0 zone(s) |
| Simmer cooking zone diameter | 160 mm |
| Regular cooking zone diameter | 190 mm |
| Large cooking zone size (W x D) | 230 x 390 mm |
| Number of flexible cooking zones | 1 zone(s) |
| Number of simultaneously used cooking zones | 4 |
| Large cooking zone | 3400 W |
| Number of boosters | 2 |
| Number of power levels | 9 |
| Control type | Touch |
| Control position | Top front |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | 0 W |
| Connected load (electric) | 7300 W |
Weight and Dimensions| Depth | 492 mm |
|---|---|
| Width | 592 mm |
| Weight | 11000 g |
| Cord length | 1.4 m |
| Height under worktop | 51 mm |
| Installation compartment width | 596 mm |
| Installation compartment depth (max) | 496 mm |
| Installation compartment depth (min) | 470 mm |
To Next Page
