Miele KM 7404 FX User Manual

Warning and Safety instructions
9
Technical safety
 Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.
 Damage to the hob can compromise your safety. Check the hob
for visible signs of damage. Do not use the hob if it is damaged.
 Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronised
with the mains power supply (e.g. island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with the specifications of EN50160 or an
equivalent standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronised with the mains power supply, or these measures must
be replaced by equivalent measures in the installation. As described,
for example, in the current version of BS OHSAS 18001–2 ISO
45001.
 The electrical safety of this hob can only be guaranteed when
correctly earthed. It is essential that this standard safety requirement
is met. If in any doubt please have the electrical installation tested by
a qualified electrician.
 To avoid the risk of damage to the hob, make sure that the
connection data on the data plate (voltage and frequency) match the
mains electricity supply before connecting it to the mains.
Consult a qualified electrician if in doubt.
 Do not connect the hob to the mains electrical supply by a multi-
socket adapter or extension lead. These are a fire hazard and do not
guarantee the required safety of the appliance.
 For safety reasons, this hob may only be used after it has been
built in.

Miele KM 7404 FX Specifications

General

Hob type	Zone induction hob
Product color	Black
Hob width size	60 cm
Top surface type	Glass-ceramic
Appliance placement	Built-in
Cooking zone 1 type	Simmer
Cooking zone 4 type	Regular
Cooking zone 1 boost	1700 W
Cooking zone 1 power	1400 W
Cooking zone 2 boost	2500 W
Cooking zone 2 power	1850 W
Cooking zone 4 power	2100 W
Flexible cooking zone	Yes
Cooking zone 1 position	Left rear
Cooking zone 2 position	Left front
Cooking zone 3 position	Right rear
Cooking zone 4 position	Right front
Number of cooking zones	4 zone(s)
Large cooking zone shape	Rectangular
Simmer cooking zone shape	Round
Cooking zone 1 double boost	2200 W
Cooking zone 1 power source	Electric
Cooking zone 2 double boost	3000 W
Cooking zone 3 double boost	3650 W
Cooking zone 3 size (W x D)	190 x 230 mm
Number of gas cooking zones	0 zone(s)
Simmer cooking zone diameter	160 mm
Regular cooking zone diameter	190 mm
Large cooking zone size (W x D)	230 x 390 mm
Number of flexible cooking zones	1 zone(s)
Number of simultaneously used cooking zones	4
Large cooking zone	3400 W
Number of boosters	2
Number of power levels	9
Control type	Touch
Control position	Top front
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Connected load (gas)	0 W
Connected load (electric)	7300 W

Weight and Dimensions

Depth	492 mm
Width	592 mm
Weight	11000 g
Cord length	1.4 m
Height under worktop	51 mm
Installation compartment width	596 mm
Installation compartment depth (max)	496 mm
Installation compartment depth (min)	470 mm