What to do if ?? appears on my Miele Hob and it doesn't heat?
The appearance of ?? in the timer display indicates that the Miele hob is in demo mode. Press the 0 sensor control on any numerical display. Then touch the ? and ? sensor controls at the same time until ?? flashes alternately with ??? in the timer display.
Why do ??? and ?? flash alternately on my Miele Hob?
The hob is incorrectly connected. Disconnect the hob from the mains electricity supply. Contact the Customer Service Department. The hob must be connected to the mains according to the wiring diagram.
General| Hob type | Zoneless induction hob |
|---|---|
| Product color | Black |
| Hob width size | 80 cm |
| Top surface type | Glass-ceramic |
| Appliance placement | Built-in |
| Number of cooking zones | 1 zone(s) |
| Number of gas cooking zones | 0 zone(s) |
| Timer type | Digital |
| Control type | Touch |
| Auto power off | Yes |
| Control position | Front / Top front |
| Number of boosters | 2 |
| Regular cooking zone | 3650 W |
| Number of power levels | 9 |
| Number of simultaneously used pans/pots | 6 |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | 0 W |
| Connected load (electric) | 11000 W |
Weight and Dimensions| Depth | 520 mm |
|---|---|
| Width | 800 mm |
| Height | 51 mm |
| Weight | 19000 g |
| Cord length | 1.4 m |
| Installation compartment width | 780 mm |
| Installation compartment depth (max) | 524 mm |
| Installation compartment depth (min) | 500 mm |
Manual for Miele induction hobs, covering operation and installation.
General warnings and advice for safe use and installation of the hob.
Specific safety measures to protect children from hazards associated with the hob.
Ensures electrical safety, proper installation, and connection to the mains supply.
Instructions for safe operation, including preventing fires and damage.
How to operate the hob using the touch-sensitive sensor controls.
Instructions for switching the hob on/off, setting power levels, and residual heat.
Configuring the timer to automatically switch off cooking zones.
Activating and deactivating system lock and safety lock to prevent accidental changes.
Automatic shut-off mechanisms for sensor coverage and excessive operating time.
How the overheating protection mechanism prevents damage and ensures safety.
Troubleshooting common display messages like Err, LOC, and dE.
Diagnosing and resolving issues like pan detection and automatic zone shut-off.
Critical safety warnings and requirements before installing the hob.
Required clearances above, to the sides, rear, and underneath the hob.
Guidelines for connecting the hob to the power supply and wiring diagrams.
To Next Page
