What to do if ?? appears on my Miele Hob and it doesn't heat?
The appearance of ?? in the timer display indicates that the Miele hob is in demo mode. Press the 0 sensor control on any numerical display. Then touch the ? and ? sensor controls at the same time until ?? flashes alternately with ??? in the timer display.
Why do ??? and ?? flash alternately on my Miele Hob?
The hob is incorrectly connected. Disconnect the hob from the mains electricity supply. Contact the Customer Service Department. The hob must be connected to the mains according to the wiring diagram.
General| Hob type | Zoneless induction hob |
|---|---|
| Product color | Black |
| Hob width size | 80 cm |
| Top surface type | Glass-ceramic |
| Appliance placement | Built-in |
| Number of cooking zones | 1 zone(s) |
| Number of gas cooking zones | 0 zone(s) |
| Timer type | Digital |
| Control type | Touch |
| Auto power off | Yes |
| Control position | Front / Top front |
| Number of boosters | 2 |
| Regular cooking zone | 3650 W |
| Number of power levels | 9 |
| Number of simultaneously used pans/pots | 6 |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | 0 W |
| Connected load (electric) | 11000 W |
Weight and Dimensions| Depth | 520 mm |
|---|---|
| Width | 800 mm |
| Height | 51 mm |
| Weight | 19000 g |
| Cord length | 1.4 m |
| Installation compartment width | 780 mm |
| Installation compartment depth (max) | 524 mm |
| Installation compartment depth (min) | 500 mm |
To Next Page
