Miele PDW 909 GB User Manual

Operating and installation instructions
Commercial washer-dryer stack
PDW 909 GB
Always read the operating instructions before
setting up, installing and commissioning the ma-
chine. This prevents both personal injury and
damage to the machine.
en-GB
M.-Nr. 12 380 090

Miele PDW 909 GB Specifications

General

Appliance type	Washer/Dryer
Colour	White
Maximum spin speed	1600 rpm
Loading type	Front Loading
Programs	Cottons, Delicates
Connectivity	No
Dimensions (H x W x D)	850 x 595 x 580 mm

Summary

Caring for the environment

Disposing of your old machine

Guidance on proper disposal of old electrical and electronic machines.

Energy saving tips

Recommendations for reducing energy and water consumption during operation.

Warnings and safety notes

Explanation of safety notes and warnings

Explains the meaning of safety symbols and warnings used on the machine.

Appropriate use

Details the intended use of the washer-dryer stack to prevent damage and injury.

Technical safety

Covers electrical safety, installation requirements, and unauthorized repairs.

Correct use

Provides instructions on how to operate the machine safely and correctly.

Chlorine and component damage

Warns about the effects of chlorine-based products on machine components.

Description of the machine

Machine components overview

Identifies and labels the various parts of the washer-dryer stack.

Operation

Control panel overview

Explains the function of each button and sensor on the control panel.

Main menu navigation

Guides users on navigating through the main menu and accessing sub-menus.

Examples of how to operate the machine

Demonstrates typical operational sequences and interactions with the display.

Washing

Preparing the machine for use

Steps before starting a wash, including emptying pockets and sorting laundry.

Loading the washing machine

Instructions on how to properly load laundry into the drum.

Using the detergent drawer

Guidance on adding detergents, fabric conditioner, and starch.

Selecting a wash programme

How to choose and set up wash programmes from menus.

Selecting programme settings

Adjusting parameters like load size, temperature, and spin speed.

Programme start and end

Steps for starting a wash programme and what happens until it ends.

Special programme features

Explains features like spinning, anti-crease, skip, and manual control.

Drying

Notes on correct laundry care before drying

Essential laundry care steps prior to using the tumble dryer.

Loading the tumble dryer

Instructions for correctly loading laundry into the dryer drum.

Selecting a drying programme

How to choose and start drying programmes via the main menu.

Selecting programme settings

Adjusting drying level and selecting extra options for programmes.

Starting a drying programme

Steps to initiate a drying cycle, including optional payment devices.

End of the programme

What happens when a drying programme concludes, including cooling and removal.

Changing the programme sequence

Washing machine programme changes

How to alter, cancel, or resume washing programmes.

Tumble dryer programme changes

Steps for changing, cancelling, or adding laundry to dryer programmes.

Problem solving guide

Troubleshooting guide

General procedures for identifying and resolving machine issues.

Opening the door in an emergency

Instructions for manually opening the drum door during power failures.

Customer Service Department contact

Information on contacting Miele service for assistance with malfunctions.

Programme start errors

Solutions for issues preventing a programme from starting.

Insufficient wash results

Causes and remedies for poor washing outcomes.

Insufficient drying results

Explains issues leading to inadequate drying and their solutions.

Door opening issues

Solutions for problems related to the door not opening correctly.

Cleaning and care

General cleaning instructions

Guidelines for cleaning the machine's exterior and interior parts.

Cleaning detergent dispenser

Detailed steps for cleaning the detergent drawer, compartments, and siphons.

Cleaning water inlet filters

How to clean filters to ensure proper water intake.

Cleaning the fluff filter

Instructions for removing, dismantling, and cleaning the fluff filter.

Installation

General operating conditions

Environmental and site requirements for operating the washer-dryer stack.

For ease of maintenance

Minimum clearances required around the machine for service access.

Installing the washer-dryer stack

Procedures for assembling and positioning the washer and dryer units.

Removing transit bars

Step-by-step guide to removing transport safety devices.

Levelling the machine

How to adjust the machine's feet to ensure it is level.

Installing the tumble dryer at the top

Steps for placing and securing the dryer unit on top of the washing machine.

Water connection

Requirements and procedures for connecting the machine to water supplies.

Electrical connection

Safety guidelines and requirements for electrical hook-up.

Supply air and exhaust air management

Crucial information on room ventilation and exhaust ducting for the dryer.

Optional accessories

Information on available accessories like the Connector Box.

Washing machine supervisor level

Opening the supervisor level

How to access the machine's advanced settings menu.

Operation and display settings

Customizing language, display brightness, time, and date.

Programme selection options

How to configure programme lists and selection modes.

Appliance parameters configuration

Setting maximum spin speed, temperature, and legal information.

Tumble dryer supervisor level

Opening the Supervisor level

Accessing the dryer's advanced settings menu.

Controls and display settings

Managing language, display options, and clock settings.

Programme selection modes

Configuring dryer operation modes like standard or launderette.

Process technology adjustments

Modifying settings for anti-crease and drying levels.

Service reminders configuration

Setting up reminders for cleaning filters and performing maintenance.

External applications setup

Connecting and configuring external hardware like exhaust flaps and fans.

Machine parameters configuration

Setting up legal information and payment systems.

Technical data

PDW 909 machine specifications

Detailed technical data including electrical, installation, and plumbing specifications.

Air intake and vented system data

Information on air requirements and specifications for vented drying systems.

Declarations of conformity

Compliance statements regarding UK and EU regulations.

WiFi data protection

Data protection and security

Information on data transmitted to the Miele Cloud and security measures.

Network configuration defaults

Steps for resetting network settings to factory defaults.