General problems with the dishwasher
Problem Possible cause Remedy
The indicators and
display are dark. Only
the Start/Stop
indicator light is
flashing slowly.
The indicators and
display have switched
off automatically to save
energy (Standby mode).
Press the - button.
This switches Standby off.
The interior lighting
does not come on
when the door is
opened.
The lighting has been
switched off
permanently.
Switch the lighting back on
again (see "Additional
functions, BrilliantLight").
The following fault
message appears in
the display:
F Salt reservoir lid
The salt reservoir lid has
not been closed
properly.
–
Close the salt reservoir lid
properly.
If the salt reservoir lid has
sprung open during a
programme:
– Switch the dishwasher off
and then on again with the
- button.
– Start the programme
again.
The following fault
message appears in
the display during the
programme sequence:
: Spray arm blocked
Items are blocking the
path of the middle spray
arm.
Open the dishwasher door
and rearrange the items
which are obstructing the
spray arm.
The middle spray arm
jets are blocked.
–
Switch the machine off
with the - button.
Then:
–
Clean the spray arm. See
"Cleaning and care".
Problem solving guide
50
To Next Page
Loading...
