Optimise standby
To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or a few minutes after the end
of the programme. The display and the
indicator lights will go out, and only the
Start/Stop indicator will flash slowly.
The dishwasher will not switch to
Standby mode whilst a programme is
running.
If the dishwasher is not switched off at
the end of the programme, it will switch
off completely after a few minutes in
Standby mode.
The Optimise standby function can be
deactivated if wished. The display and
the indicator lights will not go out, and
the time lapse before the dishwasher
switches off will increase to approx.
6 hours, resulting in higher energy
consumption.
^ Select the setting you want, and
confirm your selection with the
middle button.
The dishwasher will not switch into
Standby mode whilst a programme
is running, if salt or rinse aid needs
to be replenished or there is a fault.
Settings menu
72
To Next Page
Loading...
