Some functions can be called up at any time via a context
menu, irrespective of the operating level:
–
Change display language,
–
Change operating level,
–
Enter delay start,
–
(On convertible washer-disinfectors)
Switch heating method,
–
Link the load items with the barcode scanner.
In addition, current fault messages will be displayed in
operating level D (if applicable).
^ Press the - e buttons at the same time for at least 3
seconds to call up the context menu.
The context menu will appear in the display:
Context menu B
Scanned loads
Change display language F
Change operating level
#
The -ebuttons are used to select the options.
Context menu
20
To Next Page
Loading...
