Need help?Do you have a question about the Miele PG 8528 and is the answer not in the manual?
General| Number of wash arms | 3 |
|---|---|
| Electrical connection | 3N AC 400V 50HZ |
| Spin Speed | Not applicable |
| Noise Level (Spinning) | Not applicable |
| Width | 600 mm |
| Height | 820 mm |
| Depth | 600 mm |
Machine designed for specific applications only, alterations are not permitted.
Guidelines for using Miele and third-party accessories to ensure proper function.
Explanation of warning symbols displayed on the appliance.
Instructions for safe and environmentally sound disposal of the appliance.
Lists various types of medical and laboratory items for reprocessing.
Defines different operator roles and their access levels for machine operation.
Details requirements for service, administration, and validation tasks.
Identifies external components on the unclean side of the machine.
Identifies external components on the clean side of the machine.
Explains the function of buttons and the display panel.
Describes the information shown on the machine's display.
Illustrates how lists are displayed and navigated.
Shows how programme progress and status are displayed.
How to change the language shown on the display screen.
How to switch between different user access levels and their functions.
How to set a programme to start at a later, specific time.
How to change the heating method (electric or steam).
How to view and acknowledge error messages displayed by the machine.
How to manage load items, typically with a barcode scanner.
How to check cleaning effectiveness using periodic protein tests.
Guidelines for correctly loading items into the machine for optimal cleaning.
Instructions for preparing items before loading into the machine.
Guidance on safely unloading processed instruments after the cycle.
How to load baby bottles in a specific mobile unit.
Instructions for preparing laboratory glassware before loading.
How to load laboratory glassware into the machine correctly.
Simple programme for light soiling with low final rinse requirements.
General programme for light to medium soiling with medium rinse requirements.
Programme for medium-heavy to heavy soiling with high rinse requirements.
Programme for medium-heavy to heavy soiling with medium rinse requirements.
Programme for light to medium-heavy soiling with high rinse requirements.
General problems and solutions related to chemical processes in the machine.
Issues and resolutions concerning chemical agents used in the machine.
Problems and solutions related to soiling and its effects on the machine.
How chemical agents and soiling interact and potential issues.
Details the internal and external dispensing systems available on the machine.
Information about the OXIVARIO kit and its specific use.
Information about the ORTHOVARIO kit and its specific use.
Instructions for refilling chemical agent containers.
Explains the message indicating a container needs refilling.
Instructions for checking and resolving dispensing system errors.
How to vent the dispensing system after refilling or maintenance.
Function and operation of the main power switch.
Steps for powering on the washer-disinfector.
Explains different operating levels and their display content.
Procedures for opening and closing the machine door.
How to initiate a selected cleaning programme.
Information specific to machines with DK+WRG feature.
Specific instructions and functions for operating level C.
Instructions for operating levels A and B.
Instructions for operating level D.
How programme stages and status are displayed during operation.
What appears on the display when a programme finishes.
Steps for turning off the washer-disinfector.
How to interrupt and cancel an ongoing programme.
Procedure for temporarily pausing an active programme.
Lists available functions for the optional barcode scanner.
How to scan barcodes when using a conveyor system.
How to scan the operator's barcode for loading identification.
How to abort the operator scanning process.
How to scan the operator's barcode at the end of the programme.
How to bypass the operator scan at unloading.
Instructions for scanning barcodes of items within the load.
How to cancel the load scanning process.
How to bypass the load scanning process.
How to finalize the load scanning process.
How to confirm and save scanned load data.
How to add new scanned loads to a list.
How to view previously scanned loads and their details.
How to remove scanned loads from the list.
How to reorder scanned loads in the list.
Schedule and scope of periodic technical inspections by a service technician.
User and technician responsibilities for process validation.
Daily checks to be performed by the user before starting operation.
Instructions for cleaning the flat and circulation pump filters.
Detailed steps for cleaning the flat filter.
Procedure for cleaning the circulation pump filters.
How to clean the spray arms to ensure proper function.
How to clean the control panel and glass door.
How to clean the stainless steel front panel.
General advice on cleaning the wash cabinet.
How to clean and maintain door seals.
Daily checks and maintenance for mobile units, modules, and inserts.
Steps to replace the printer paper roll.
Steps to replace the printer ribbon.
Purpose and application of OXIVARIO and ORTHOVARIO processes.
Specific applications for the special OXIVARIO and ORTHOVARIO processes.
Additional safety precautions for using special processes.
Steps for connecting the hydrogen peroxide solution container.
Explanation of the DK+WRG feature and its identification symbol.
Specific applications for washer-disinfectors with DK+WRG.
Safety guidelines specific to the DK+WRG version.
List of standard programmes usable with DK+WRG models.
To Next Page
