Cleaning the controls and the
(optional) glass door
^
Switch the washer-disinfector off with
s.
^
The controls and glass door should
only be cleaned using a damp cloth
or with a proprietary cleaning agent
for glass surfaces.
An approved and listed disinfecting
agent can be used to wipe surfaces.
,
Do not use abrasive cleaners or
all-purpose cleaners.
Because of their chemical
composition they could cause
serious damage to the glass
surface.
Cleaning the front of the
machine
^ The stainless steel front should be
cleaned using a damp cloth and a
little washing-up liquid, or with a
non-abrasive proprietary cleaning
agent designed for use on stainless
steel.
^
To help prevent resoiling
(fingermarks etc.) a stainless steel
conditioning agent (available from
Miele) can also be used.
,
Do not use any cleaning agents
containing ammonia or thinners as
these can damage the surface
material.
,
Never clean the machine or near
vicinity with a hose or a pressure
washer.
Cleaning the wash cabinet
The wash cabinet is generally
self-cleaning.
However, should a build-up of deposits
occur in the cabinet please contact the
Miele Service Department for advice.
Cleaning the door seals
The door seals should be cleaned
regularly with a damp cloth to remove
any soiling.
Seals which are no longer tight or which
have suffered damage must be
replaced with new ones by a Miele
approved service technician.
Maintenance
69
To Next Page
Loading...
