Adding scanned loads
To process scanned loads together, first the context menu
and then
Scanned loads must be called up in the menu and
confirmed.
Scanned loads B
Move scanned loads
Add scanned loads
Display scanned loads
#
^
Select
Add scanned loads and confirm.
The following message will appear:
Scan the load
^ Scan the individual items in the load.
^ Confirm the complete scanned load with OK.
Repeat the steps to add additional scanned loads. The
scanned loads are saved in a list (see "Displaying scanned
loads"). The load which was scanned last is added to the end
of the list.
A maximum of 50 scanned loads can be stored.
Before further scanned loads can be added, scanned loads
must be reprocessed or deleted.
Barcode scanner (optional)
59
To Next Page
Loading...
