Display
The display can show the following, depending on the
operating level:
–
the programme / programme overview
–
the programming menu
–
the Settings J menu
The Settings menu J is used to alter the
washer-disinfector's profitronic controls to suit different
requirements. See the Programming manual for more
details.
An example of a selected list
Programme overview B
CHANGE-TA-FINE
DES-VAR-TD
DES-VAR-TD-AN
#
The -ebuttons are used to select the options.
The selector buttons -e move the highlighting in the display.
The OK button is used to confirm a message or setting and
also to move to the next menu or to another menu level.
To select an option use the selector buttons -e to highlight it
and then confirm your selection with the OK button.
The display shows a maximum of three options or choices. A
scroll bar on the right hand side of the display indicates that
more options or choices are available. The -e selector
buttons are used to display these.
The end of the list is marked with a dotted line. The last entry
in the list is shown above the line and the first, below it.
Guide to the machine
18
To Next Page
Loading...
