Scanning the load
When Scan the load is activated, the following message will
appear to prompt the operator to scan the load:
Scan the load
A
: Scan the load
^
Scan the first barcode on the load.
The barcode numbers of the scanned load will be listed in the
menu
Scan the load.
Scan the load
A
0987664
^ Scan any other barcodes if necessary.
If a barcode has already been scanned, the following
question will appear in the display:
Load already scanned. Accept?
A maximum of 99 load barcodes can be scanned. The
following message will then appear:
Max. number of entries reached
You can use +C to delete the last entry on the list. To avoid
deleting an entry inadvertently, the following "Are you sure"
question must be answered:
Delete last entry?
Barcode scanner (optional)
55
To Next Page
Loading...
