Standardprogrammes
The following standard programmes are the only ones that
can be used with DK+WRG model washer-disinfectors (no
changes may be made to them ):
Programme name Areas of application
DES-VAR-TD for general cleaning and disinfecting procedures (A
0
=3000)
DES-VAR-TD-AN for cleaning and disinfecting anaesthetic instruments and
utensils (A
0
=600)
VAR-TD-NR for cleaning and disinfecting instruments that are sensitive to
alkalines with a pH neutral cleaning agent (without
neutralisation) (A
0
=3000)
ORTHOVARIO * this is an oxidising vario programme suitable for aluminium
items (A
0
=3000)
OXIVARIO * this is an alkaline oxidising vario programme suitable for
items requiring intensive cleaning (A
0
=3000)
OXIVARIO PLUS * this programme is recommended for the prevention of CJD
(A
0
=3000)
* Special cleaning programmes, see "Special processes -
OXIVARIO and ORTHOVARIO"
The other standard programmes have to be adapted if
required. See "Processing a programme" in the
Programming manual.
If standard programmes need to be adapted or new
programmes created please make sure you follow the
programme requirements for "Special version with DK +
WRG" specified in the Programming manual.
,
When using automatic mobile unit recognition please
make sure that the coding on mobile units is matched to
programmes for DK+WRG.
Special version with DK + WRG
82
To Next Page
Loading...
