Miele PG 8528 - Mobile units, modules and inserts

Mobile units, modules and
inserts
Mobile units, modules and inserts
should be checked daily to make sure
they are functioning correctly. The
washer-disinfector is supplied with a
check list.
The following need to be inspected:
–
Check that the guide rails on mobile
units/inserts are free of hindrance
and that they are secured to the
mobile units/inserts correctly.
– Check that the counternuts on the
guide rails are tightened correctly.
– Check that the mobile unit connector
is at the correct height and screwed
on correctly.
– Check that the locking caps in the
module connectors of modular
system mobile units are working
properly.
–
Check that jets, sleeves and hose
adapters are securely held in
position in mobile units/inserts.
–
Check that washing solution can flow
unhindered through all jets, sleeves
and hose adapters.
–
Make sure caps and closures on
sleeves are correctly located.
–
Make sure that there are no small
metallic objects sticking to the
magnetic strip on a mobile unit with
automatic mobile unit recognition.
–
Check that the magnetic strip on
mobile units with automatic mobile
unit recognition is correctly screwed
into position.
Where there are spray arms:
–
Make sure that the spray arms rotate
freely.
–
Make sure the spray arm jets are free
of any blockages. See "Cleaning the
spray arms".
–
Check that there are magnets on the
ends of the spray arms.
–
Make sure no metal parts have been
attracted to the magnets on the ends
of the spray arms.
In line with the periodic maintenance
of the washer-disinfector the mobile
units, modules and inserts should be
routinely maintained every 2000
operating hours or annually by a
Miele approved service technician.
See ""Maintenance / Periodic
checks".
Maintenance
70