Miele PG 8527 - Scan Unloading Operator; Skipping Scan Unloading Operator

Scan unloading operator
If Scan unloading operator is activated you will be asked
to scan the operator barcode at the end of the programme.
Programme finished
Scan operator
The door cannot be opened until the operator barcode has
been scanned. The door will open automatically depending
on how the settings in the
Machine functions/ Automatic
door
menu have been configured.
After cancelling a programme with the +C button
If
Scan unloading operator is activated, the following
message will appear in the display after a programme has
been cancelled:
Programme cancelled
Water drainage
After the water has drained, the instruction to scan the
operator comes up in the display:
Scan operator
Skipping Scan unloading operator
In operating levels B and D,
Scan unloading operator can
be skipped by pressing the OK button.
"Scan unloading operator skipped" will show at the end of
the printed wash report.
Barcode scanner (optional)
54