Preparing for use Ironing Select a temperature
Switch the ironer on by pressing the On /Off
- button
The "Finger guard" symbol will fl ash in the display.
Now activate the finger guard by lifting it.
The "Start" button begins to fl ash as soon as the
ironer has reached the minimum temperature.
Now press the flashing "Start" button to start up
the ironer.
Select the temperature according to the type
of fabric.
Material Symbol Temperature
Nylon / artificial silk
100 - 110 °C
Silks / Woollens
111 - 150 °C
Cottons / Linens
151 - 185 °C
Selecting the ironer speed Laundry feed FlexControl footswitch
Select the roller speed you want.
Symbol Speed range
fi
Low speed range
fi fi
Medium speed range
fi fi fi
High speed range
Lay the item parallel to the roller at the start of
the laundry infeed table.
Smooth the item.
Feed the item into the machine.
The "FlexControl" foot switch is used for opera-
ting the ironer in Steam mode to press laundry.
To continue ironing.
Remove your foot from the foot switch to conti-
nue ironing.
Ironing with a coin-operated payment system
Switch the ironer on by pressing the "On /Off"
button.
The symbol will fl ash in the display.
Insert the coin or token.
The symbol will go out in the display.
Select the temperature range according to the
type of laundry.
Select the roller speed you want.
Please read the instruction manual before installing and using this machine and observe all warning and
safety instructions.
en - US, CA
M.-Nr. 12 051 920 / 00
When the symbol goes out in the display, the
ironer is ready to operate and the ironing time
purchased will begin to count down.
Press the "Start" button to start the ironer.
At the end of the ironing time, the heater plate
disengages and the roller comes to a standstill.
The symbol fl ashes in the display. More
ironing time can be purchased at any time.
To Next Page
Need help?
General
