Installation
36
Do not use sealant (e.g. silicone) as
an additional means for sealing the
CombiSet.
If the seal does not meet the worktop
correctly on the corners, the corner
radii (≤R4) can be carefully scribed to
suit.
Fitting the cover strips
Push the cover strips between the
CombiSets and click them into place.
Please refer to the Operating
instructions for the CombiSets before
using them for the first time.
Connecting the CombiSet
Connect the CombiSet(s) to the
mains electricity supply.
Check that each CombiSet works.
Removing the CombiSet
Starting from the back, push the
CombiSet(s) out from below.
To Next Page
Loading...