Delay start
33
The Delay start function can be used to
set the time until the programme starts
or the programme finish time (see
“Delay start” under “Supervisor level”).
Selecting the Delay start func-
tion
Touch the Further choicessensor
control.
Select the Finish at, Start at or
Start inoption.
Use the andsensors to enter the
hours and minutes and confirm your
entry with the OKsensor.
The minutes entry moves to the next
“full quarter of an hour” and can then
be adjusted in 15-minute increments.
Starting Delay start
Touch the Start/Stopsensor.
The door will lock and the time until the
programme starts will appear in the dis-
play.
Cancelling or changing Delay
start
Touch the Start/Stopsensor.
The following will appear in the display:
Add laundry
Cancel
programme
Start programme
immediately
Touch the Start programme immedi-
atelysensor.
The wash programmes starts immedi-
ately.
or
Touch the Cancel programmesensor.
The programme start is cancelled and
the Start/Stopbutton flashes on and
off.
To Next Page
Loading...
Need help?
General
