Supervisor level
76
The settings menu in the Super-
visor level is locked against unauthor-
ised access. The menu can be un-
locked with a code.
Code-based access
Supervisor level is accessed using a
code.
The code is 000 (factory default).
Changing the code
You can alter the Supervisor level ac-
cess code to protect the washing ma-
chine from unauthorised access.
Please inform Miele Service if you
have forgotten your new code. Miele
Service will have to reset the code.
Make a note of your new code and
store it in a safe place.
Accessing supervisor level
Turn the programme selector, e.g. to
the Mops 60°Cprogramme.
Touch the Further choicessensor
control.
Touch the Supervisor levelsensor
control.
Supervisor
level
Access via code
Change code
SelectAccess via code.
Enter the individual numbers and
confirm each selection with OK.
Supervisor
level
Language
Brightness
Select the setting you want.
Some settings are only visible if ex-
ternal devices are connected via the
XCI box.
Exiting the Supervisor level
Touch the sensor or switch off the
washing machine.
To Next Page
Loading...
Need help?
General
