Need help?Do you have a question about the Miele PWM 300 SmartBiz and is the answer not in the manual?
General| Door color | Silver |
|---|---|
| Door hinge | Right |
| Water fill | Cold |
| Cord length | 2 m |
| Drum volume | 64 L |
| Control type | Rotary, Touch |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Inlet hose length | 1.55 m |
| Custom panel-ready | No |
| Door opening angle | 167 ° |
| Illumination color | Yellow |
| Outlet hose length | 1.5 m |
| Appliance placement | Freestanding |
| Dispenser tray type | 3-way |
| Current | 10 A |
| Connected load | 2400 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.4 W |
| Water consumption per cycle | 37 L |
| Energy consumption washing per cycle | 0.76 kWh |
| Drum capacity | 7 kg |
| Cycle time (max) | 199 min |
| Delay start (max) | 24 h |
| Residual moisture | 48 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 69 dB |
| Noise level (wash) | 50 dB |
| Number of washing programs | 12 |
| Cycle time (quick washing program) | 15 min |
| Package depth | 690 mm |
| Package width | 660 mm |
| Package height | 944 mm |
| Package weight | 95000 g |
Weight and Dimensions| Depth | 636 mm |
|---|---|
| Width | 596 mm |
| Height | 850 mm |
| Weight | 91000 g |
| Door diameter | 300 mm |
| Depth with door open | 1054 mm |
Explanation of the washing machine's control panel layout and component functions.
Guidance on choosing wash programmes, temperature, spin speed, and pre-wash.
Details on using the detergent drawer and determining correct amounts based on water hardness.
Steps for starting a wash, adding laundry mid-cycle, and ending the programme.
Steps for diagnosing and resolving problems when the wash programme doesn't start.
Interpretation of error codes, display symbols, and fault indicator lights.
Procedures for opening the door, dealing with drain blockages, or power failures.
Guidance on suitable installation surfaces, removing transit bars, and levelling the machine.
Steps for correctly connecting the machine to water, drainage, and the electrical supply.
To Next Page
