Miele PWM 300 SmartBiz - Delay start function; Managing the delay start feature

Delay start
28
With Delay start, you can delay the start
of a programme from 30minutes up to
a maximum of 24hours.
Selecting the Delay start func-
tion
Delay start cannot be selected in the
Drain/Spin programme.
 Select the programme required.
 Touch the sensor control.
The sensor control lights up brightly.
 Touch the or sensor control re-
peatedly until the required Delay start
time appears on the time display.
– In the case of settings below
10hours, the Delay start time
changes in increments of 30minutes.
– In the case of settings above
10hours, the Delay start time
changes in increments of 1hour.
Starting Delay start
 Touch the flashing Start/Stop sensor
control.
The Delay start process starts and
counts down on the time display.
The symbol will flash.
Changing the Delay start time
 Touch the Start/Stop sensor control
until the door unlocks and the
symbol goes out.
The Delay start process stops.
 Touch the or sensor control re-
peatedly until the required Delay start
time appears on the time display.
 Touch the flashing Start/Stop sensor
control.
Cancelling Delay start
 Touch the Start/Stop sensor control
until the door unlocks and the
symbol goes out.
The Delay start process stops.
 Touch the brightly lit sensor con-
trol.
The Delay start time is deleted. The pro-
gramme duration appears on the time
display.
 Touch the flashing Start/Stopsensor
control in order to start the wash pro-
gramme.