Changing the programme sequence
33
Changing a programme
After the start of a programme, it is no
longer possible to select a different pro-
gramme.
You will need to cancel the current pro-
gramme before you can select a new
one.
appears on the time display if the
programme selector has been moved.
Set the programme selector back to
its original position.
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
Touch and hold the Start/Stop sensor
control until the time display switches
to.
The suds are pumped away. The pro-
gramme is cancelled. The door lock is
released.
Pull open the door.
Remove the laundry.
If you want to select a different pro-
gramme:
Close the door.
Select the programme you want to
use.
Add detergent to the detergent
drawer.
Touch the Start/Stop sensor control.
The new programme will begin.
Adding or removing laundry
You can add or remove laundry at the
start of a wash programme as long as
the symbol is flashing in the control
field.
Touch the Start/Stop sensor control
briefly.
The programme will stop and the door
will unlock.
Pull open the door.
Add or remove items.
Close the door.
Touch the Start/Stop sensor control.
The programme will continue.
To Next Page
Loading...
