Miele PWM 300 SmartBiz User Manual

Problem solving guide
43
General problems with the washing machine
Problem Cause and remedy
There is water next to
the capsule in the fabric
conditioner compart-
ment.
The CapDosing sensor control was not activated or
an empty capsule was not removed at the end of the
last wash programme.
 Activate the CapDosing sensor control when a
capsule is next used.
 Remove and dispose of the empty capsule at the
end of each programme.
There is a blockage in the small pipe in the detergent
drawer onto which the capsule is placed.
 Clean the small pipe.
The door will not open
Problem Cause and remedy
The door cannot be
pulled open during a
wash cycle.
The door is locked during the wash programme.
 Touch the Start/Stop sensor control to cancel the
programme.
The programme is cancelled, the door will unlock and
you will be able to pull it open.
There is still water in the drum and the machine is un-
able to drain.
 Clean the drain filter and drain pump as described
in “Problem solving guide – Opening the door in
the event of a blocked drain outlet and/or power
failure”.
After the programme is
cancelled, flashing bars
......... appear
in the time display.
For safety reasons the drum door cannot be opened
if the suds temperature is higher than 55°C.
 Wait until the temperature in the drum has de-
creased and the bars have stopped flashing in the
display.
 and  alternately ap-
pear in the time display.
The door lock has jammed.
 Call the Service Department.

Miele PWM 300 SmartBiz Specifications

General

Door color	Silver
Door hinge	Right
Water fill	Cold
Cord length	2 m
Drum volume	64 L
Control type	Rotary, Touch
Loading type	Front-load
Product color	White
Built-in display	Yes
Inlet hose length	1.55 m
Custom panel-ready	No
Door opening angle	167 °
Illumination color	Yellow
Outlet hose length	1.5 m
Appliance placement	Freestanding
Dispenser tray type	3-way
Current	10 A
Connected load	2400 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.4 W
Water consumption per cycle	37 L
Energy consumption washing per cycle	0.76 kWh
Drum capacity	7 kg
Cycle time (max)	199 min
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	B
Maximum spin speed	1400 RPM
Noise level (spin)	69 dB
Noise level (wash)	50 dB
Number of washing programs	12
Cycle time (quick washing program)	15 min
Package depth	690 mm
Package width	660 mm
Package height	944 mm
Package weight	95000 g

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm
Weight	91000 g
Door diameter	300 mm
Depth with door open	1054 mm