Miele PWM 300 SmartBiz - Control Field Switch-Off Status; Memory; Additional Long Pre-Wash - Cottons

Programmable functions
66
Control field switch-off
status
To save energy, the time display and
sensor controls will go out after
10minutes, and only the Start/Stop
sensor control will flash slowly.
Options
 = Off
The time display and sensor
controls will remain lit up while
the washing machine is
switched on
 = On (factory default setting)
The time display and sensor
controls will switch off after
10minutes if the programme is
started
However, the time display and
sensor controls will remain lit
up for 10minutes after a Delay
start time has elapsed, after
the end of a programme or at
the end of the anti-crease
phase.
Memory
The washing machine will save the
settings (temperature, spin speed)
which have been selected for a pro-
gramme after the programme has star-
ted.
When the programme is chosen again,
the saved settings will appear on the
display.
Options
 = Memory is switched off (fact-
ory default setting)
 = Memory is switched on
Additional long pre-wash –
Cottons
If you require a longer pre-wash, you
can extend the pre-wash time.
Options
 = No increase in the pre-wash
time (factory default setting)
 = + 6minutes increase in the
pre-wash time
 = + 9minutes increase in the
pre-wash time
 = + 12minutes increase in the
pre-wash time