EasyManuals Logo

Miele PWM 300 SmartBiz User Manual

Miele PWM 300 SmartBiz
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Problem solving guide
42
General problems
Problem Cause and remedy
The machine shakes
during the spin cycle.
The machine feet are not level and not secured.
Level the machine and adjust the feet correctly.
Strange pump noises
can be heard.
This is not a fault. These slurping noises occur at
the start and end of a pump sequence as a normal
part of the operation.
Large amounts of deter-
gent residue remain in
the detergent dispenser
drawer.
The water pressure is too low.
Clean the filters in the water inlet.
Powder detergent used in conjunction with water
softeners tends to become sticky.
Clean the detergent dispenser drawer and, in fu-
ture, add detergent into the drawer first, and then
add the water softener.
Fabric softener is not
completely dispensed
or too much water re-
mains in the com-
partment.
The siphon tube is not correctly positioned or is
clogged.
Clean the siphon, see “Cleaning and care – Clean-
ing the detergent dispenser compartment”.
The laundry has not
been spun properly. The
laundry is still wet.
The machine detected a high level of imbalance dur-
ing the final spin and reduced the spin speed auto-
matically.
Include both large and small items in the load as
this will achieve better distribution.
There is still liquid in the
capsule at the end of
the programme.
There is a blockage in the small pipe in the deter-
gent drawer onto which the capsule is placed.
Clean the small pipe.
Not a fault!
For technical reasons, a small amount of water will
remain in the capsule.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PWM 300 SmartBiz and is the answer not in the manual?

Miele PWM 300 SmartBiz Specifications

General IconGeneral
Door colorSilver
Door hingeRight
Water fillCold
Cord length2 m
Drum volume64 L
Control typeRotary, Touch
Loading typeFront-load
Product colorWhite
Built-in displayYes
Inlet hose length1.55 m
Custom panel-readyNo
Door opening angle167 °
Illumination colorYellow
Outlet hose length1.5 m
Appliance placementFreestanding
Dispenser tray type3-way
Current10 A
Connected load2400 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy efficiency scaleA to G
Power consumption (off)0.4 W
Water consumption per cycle37 L
Energy consumption washing per cycle0.76 kWh
Drum capacity7 kg
Cycle time (max)199 min
Delay start (max)24 h
Residual moisture48 %
Spin-drying classB
Maximum spin speed1400 RPM
Noise level (spin)69 dB
Noise level (wash)50 dB
Number of washing programs12
Cycle time (quick washing program)15 min
Package depth690 mm
Package width660 mm
Package height944 mm
Package weight95000 g
Weight and Dimensions IconWeight and Dimensions
Depth636 mm
Width596 mm
Height850 mm
Weight91000 g
Door diameter300 mm
Depth with door open1054 mm

Related product manuals