EasyManuals Logo

Miele PWM 506 Mop Star 60 User Manual

Miele PWM 506 Mop Star 60
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Warning and safety instructions
9
Technical safety
Before setting up the washing machine, check it for any externally
visible damage. Do not set up or use a damaged washing machine.
The electrical safety of the washing machine can only be guaran-
teed when correctly earthed.
It is most important that this basic safety requirement is tested and
in case of any doubt the on-site wiring system should be inspected
by a qualified electrician.
Miele cannot be held liable for the consequences of an inadequate
earthing system.
Unauthorised repairs could result in unforeseen dangers for the
user, for which the manufacturer cannot accept liability. Repairs
should only be undertaken by a Miele approved service technician,
otherwise any subsequent damage will not be covered by the war-
ranty.
Do not make any alterations to the machine, unless authorised to
do so by Miele.
The machine must be isolated from the electricity supply when
cleaning and maintaining the machine and in the event of a fault:
- switch off at the wall and disconnect the plug from the socket, or
- disconnect the fuse at the mains circuit board, or
- unscrew the on-site screw-in fuse.
See “Installation – Electrical connection”.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PWM 506 Mop Star 60 and is the answer not in the manual?

Miele PWM 506 Mop Star 60 Specifications

General IconGeneral
BrandMiele
ModelPWM 506 Mop Star 60
CategoryWasher
LanguageEnglish

Related product manuals