Miele SMUL0 - Charging the Battery (Without Wall Mounting); Charging the Battery (with Wall Mounting)

18
Charging the battery (without wall
mounting)
You can store the vacuum cleaner up-
right and charge the battery directly.
 Connect the PowerUnit to the Elec-
trobrush to provide a secure base for
the vacuum cleaner.
 Swing the vacuum cleaner forwards
until the Electrobrush connector aud-
ibly clicks into place.
 Plug the supplied charging cable into
the charging socket on the bottom of
the battery.
 Plug the charger into a power socket.
The charging process will start.
You can read more about this in “Bat-
tery charging state indicator”.
Charging the battery (with wall
mounting)
There are 2ways to store and charge
the vacuum cleaner in the supplied wall
bracket.
You will need a suitable location near
a free power socket for mounting the
appliance on the wall.