Miele SMUL0 - Replacing the Rechargeable Battery

31
 Unlock the cover on the side of the
Electrobrush so that the symbol
becomes visible.
 Lift the cover up as far as it will go.
 Remove the roller brush.
 Clean the roller brush and remove
any stubborn dirt inside the Electro-
brush.
 Reassemble the Electrobrush in re-
verse order.
Replacing the rechargeable battery
An original Miele AP01 lithium-ion re-
chargeable battery (HXLA) is required.
Follow the instructions regarding the
handling and disposal of rechargeable
batteries found in the following sec-
tions: “Warning and safety”, “Caring
for the environment” and “Installation
and connection” (“General battery in-
formation”).