Delay start
Once a programme has been se-
lected, the start can be delayed from
30 minutes (30) up to 24 hours (24h).
Select a programme.
Press the “Delay start” button.
Press the > button repeatedly until
the required time appears in the dis-
play:
–up to i0h in 30 minute stages;
–from i0h to 24h in 1 hour stages.
To reduce the length of time, press
the $ button.
Press the “START” button.
The chosen time will be counted down:
–from 24h to i0h in 1 hour stages;
– less than i0h in 1 minute stages.
Approximately 1 minute after the pro-
gramme starts the time left will appear
in the display.
To cancel delayed start
Press the “Delay start” button;
or, if the “START” button has already
been pressed:
switch the machine off using the
“I-On/0-Off” button.
Delay start
19
To Next Page
Loading...
