D Selecting a programme
^
Select the programme you want.
The relevant indicator light will come
on.
Indicator lights for drying levels or Extra
options and times may also be
displayed.
Programmes with drying levels
– Cottons, Minimum iron, Proofing,
Express, Automatic plus, Denim and
Shirts
^
Press the relevant button repeatedly
until the indicator light comes on.
Four drying levels can be selected with
Cottons and Express. The selection of
the other programmes is limited and
Proofing cannot be changed at all.
Tip
You can extend the range of drying
levels for some of the programmes (see
"Programmable functions").
The Cottons Normal Plus programme is
the programme used in the energy
consumption tests to AS/NZS 2442.
Refer to www.energyrating.gov.au
website for consumption data.
Refer to section "Programmable
functions - Extending the drying level
range" to select the extra drying level
"Normal Plus".
Woollens, Gentle smoothing
programmes
These programmes cannot be
changed.
Selecting Warm air duration
The indicator light for the Delay start
button will flash when this programme
is selected.
^
Press the Delay start button
repeatedly until the required time
appears in the display.
You can select a duration of 20 minutes
up to 2:00 hours.
E Selecting Extra options / Delay
start
^
By pressing the relevant button, you
can select:
Gentle tumble (see "Extra
options/Delay start").
Anti-crease (see next page) is always
switched on.
However: Delay start is not possible in
combination with Warm air.
How to dry correctly
19
To Next Page
Loading...
Need help?
General