You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
You will need to cancel the current
programme before you can select a
new one.
Once a programme has started
- Cancelling the programme and then
selecting a different programme
^
Press the Start/Stop button.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
If you press the Start/Stop button
again during the cooling down
phase, Finish will appear in the
display.
^ Switch off the tumble dryer by
pressing the jk button.
^
Switch on the tumble dryer by
pressing the jk button.
^
Select and start a new programme.
- Cancelling the programme and then
removing the laundry
^
Refer to the following: "Adding or
removing laundry after a programme
has started".
^
Switch the dryer off after closing the
door.
Changing Delay start
^
See "Delay start".
Adding or removing laundry
after a programme has started
^
Press the Door button.
^
Open the door.
^
Add or remove items as required.
^
Close the door.
^
Press the Start/Stop button.
Time remaining
Changes to the programme sequence
can alter the estimated time remaining
in the display.
Changing the programme sequence
25
To Next Page
Loading...
