Installation site
,
Make sure the dryer door can be
opened without hindrance after
installation.
–
This tumble dryer can be built in
under a worktop.
–
The machine lid must not be
removed.
To prevent faults or programmes
from running for excessively long
times:
,
The cool air intake panel at the
front of the tumble dryer must not be
blocked or covered, e.g. by a
laundry basket.
,
It is very important to avoid a
build up of heat. The warm air which
is expelled from the rear of the dryer
must be able to dissipate.
Levelling the machine
The machine must be perfectly level to
ensure safe and proper operation.
^
The screw feet can be adjusted to
compensate for any unevenness in
the floor.
,
The gap between the base of the
dryer and the floor must not be
minimised by a plinth or thick-piled
carpet as this will prevent a
sufficient intake of cold air.
Installation and connection
43
To Next Page
Loading...
Need help?
General