Before you begin, first ensure that:
–
The dryer is switched off.
–
The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Gentle tumble button five
times.
– The Gentle tumble indicator light will
briefly flash eight times.
The option selected will be displayed
by a number which will alternate with
P.
0 On
I Factory default setting; Not in
current programme
(Indicator light Automatic plus will
also flash once)
2 Off
(the Automatic plus indicator light will
also flash twice)
E Pressing the Start/Stop button
switches from one number to the
other.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can alter the
settings again at any time.
Check
^ Repeat steps A to D.
^
Switch the dryer off after step D.
Programmable functions
59
To Next Page
Loading...
