Rear view
a Handle for easy transport (arrows)
b Power cord with plug
c Vent connection rear
Installation site
,
Do not install the dryer in a
location where its door could conflict
with room doors.
,
This appliance is not intended to
be mounted in a wall or other
vertical surface of a building or
cabinet. The unit is allowed for
built-in application.
Transporting the dryer to the
installation site
The rear excess end of the lid has a
handle for transport.
^ Use the front dryer feet and the rear
excess end to transport the dryer
from the packaging base to the
installation site.
Installation
27
To Next Page
Loading...
