Leveling the dryer
The dryer must be level to ensure safe
and proper operation. Minor
discrepancies do not however, have an
adverse effect on operation.
The machine can be leveled by turning
the legs clockwise or counterclockwise
as necessary.
Determining the position of the
exhaust connection
The exhaust connection can be left at
the rear of the dryer (factory standard)
or moved to the left or right side of the
dryer.
Changing the position of the exhaust
connection
^ To remove the exhaust connection
cover on the left or right side of the
dryer turn it counterclockwise and
take it out.
^
Firmly press the cover into the rear
opening.
Installation
29
To Next Page
Loading...
