3. Selecting a programme and starting it
29
Starting a programme
Touch the flashing Start/Add laundry
sensor.
The Start/Add laundry sensor lights up.
Programme sequence
– If Delay start has been selected, the
Delay start time will start to count
down first.
– The programme starts.
– The Perfect Dry indicator will only
flash/light up with programmes with
selectable drying levels (see also
“Operating the tumble dryer”).
– The dryer measures the residual
moisture of the laundry and
calculates the required programme
duration.
If a small load or dry laundry is
placed in the dryer, it is dried/aired
for a preset duration. In this case the
Perfect Dry indicator does not light
up at the end of the programme.
Laundry items and fabrics can wear
out unnecessarily.
Avoid over-drying laundry and
garments.
– Before the programme finishes, the
laundry is cooled.
Energy savings
After 10minutes, the indicators dim.
The Start/Add laundry sensor flashes
slowly.
Touch the Start/Add laundry sensor
to switch the indicators on again (this
does not have any effect on a running
programme).
Adding laundry
You can add laundry after the
programme has started.
Follow the instructions in the sections
“Changing the programme sequence”
and “Adding or removing laundry”.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
