Problem solving guide
48
Problem Possible cause and remedy
flashes/lights up
after the tumble dryer is
switched on and a
programme cannot be
selected.
Access via a code has been activated.
See “Programmable functions - PIN Code”.
and another number
combination flash after
a programme has been
cancelled, a signal
sounds.
There is no obvious cause.
Switch the dryer off and then on again.
Start a programme.
If the programme terminates again with the same
error message, then there is a fault. Contact Miele.
: lights up and the
programme has been
cancelled, a signal
sounds.
The laundry is unevenly distributed or has rolled up.
Untangle the laundry and remove a few items, if
necessary.
Switch the dryer off and then on again.
Start a programme.
To Next Page
Loading...
