Cleaning and care
46
Cleaning the plinth filter
Clean the plinth filter whenever the
indicator light comes on or when the
program duration is longer than usual.
To turn the indicator light off:
Open and close the door while the
dryer is switched on.
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The access panel will spring open.
Pull the plinth filter out by the handle.
The right-hand guide pin comes out
when the plinth filter is removed. The
guide pin prevents the access panel
from closing without the plinth filter.
To Next Page
Loading...
