Miele TXD 160 WP - Page 87

Programmable functions
87
- Some software updates can only be
carried out by Miele Customer
Service.
Activating/deactivating
The RemoteUpdate function is
activated by default. Available updates
will be downloaded automatically but
will only be installed if you initiate
installation manually. Deactivate
RemoteUpdate if you do not want any
updates to be downloaded
automatically.
Options
 = Off
 = On (factory default)
Starting the update
After the tumble dryer is switched on,
 appears on the time display.
 Touch the Start/Add laundry sensor
button.
 starts to flash on the time display.
The update starts.
Bars on the time display show the
progress of the update:
 = 0%
 = 100%
Postponing the update
After the tumble dryer is switched on,
 appears on the time display.
 Touch the  sensor button.
The next time you switch on the
appliance, you will be prompted to start
the update again.