Electronic programme locking
Programme locking prevents the ma
-
chine from being opened or the
programme cancelled during a wash
programme.
To activate programme locking
^
After the start of a programme, press
the START button for at least 4 sec
-
onds until the
locked
check light
(lower right on the control panel) co
-
mes on.
Programme locking is now activated.
The machine will now not accept any
changes and the programme will pro-
ceed through to the end.
Programme locking is deactivated auto-
matically at the end of the programme.
Deactivating programme locking
early
^
Now press the START button for at
least 4 seconds until the
locked
check light (lower right on the control
panel) goes out
Exception:
If the programme selector has been
moved and the
Anti-crease/Finish
indi
-
cator light is flashing in the sequence
display.
^
First, turn the programme selector
back to the programme chosen previ-
ously. The
Anti-crease/Finish
indica-
tor light will go out.
^ Now press the START button for at
least 4 seconds until the
locked
check light (lower right on the control
panel) goes out
Locking functions
32
To Next Page
Loading...
