Interrupting a programme
^
Switch the washing machine off with
the I-ON/0-OFF button.
To continue with the same programme:
^
Switch the machine back on with the
I-ON/0-OFF button.
Altering a programme once
selected
The machine will accept the following
changes after a programme has
started:
– at any time after the start
, the spin
speed can be changed within the
limits for the programme.
– up to 6 minutes after the start
, the
additional functions
Water plus
and
Intensive
can be selected or
deselected and a different
temperature can be selected for the
programme in use, e.g. from
COTTONS 60°C to COTTONS 40°C.
After the start of a programme it is no
longer possible to select a different
programme, e.g. change from a
MINIMUM IRON to a COTTONS
programme.
If the programme selector is moved, the
indicator light
Anti-crease/Finish
will
start flashing. However, the programme
sequence remains unaffected. The
indicator light will go out again when
the programme selector is moved back
to the programme previously chosen.
Skipping a programme stage
^
Turn the programme selector to
Finish
.
As soon as the programme sequence
indicator light for the programme stage
you want the programme to continue at,
starts flashing:
^
Turn the programme selector back
again to the appropriate programme
within 4 seconds
.
Programmes cannot be altered and
programme stages cannot be
skipped if programme locking has
been activated.
To cancel or select a different
programme
^ Switch the machine off with the
I-ON/0-OFF button.
^ Turn the programme selector to
Finish
.
The programme has now been
cancelled.
^
Switch the machine back on with the
I-ON/0-OFF button.
^
Select a different programme.
^
Press the START button.
How to wash correctly
28
To Next Page
