Final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. In some
programmes, an additional rinse is
introduced if a spin speed of less than
700 rpm is selected.
To omit the final spin (Rinse hold)
^
Press the Further extras 4 button
and select the Rinse hold option.
–
To start the final spin and end the
programme:
The washing machine will display the
maximum spin speed possible. You
can use the X button to select a
lower spin speed. Start the final spin
by pressing the Start/Stop button.
– To end the programme without the
final spin:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No spin)
^
Select No ..
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the
anti-crease stage. With some
programmes an additional rinse is
introduced if this setting is selected.
Spinning
26
Programme rpm
Cottons 1600
Minimum iron 1200
Delicates 600
Woollens / 1200
Silks / 600
Express 20 1600
Hygiene 1600
Automatic plus 1200
Shirts 600
Denim 900
Separate rinse 1600
Drain / Spin 1600
Dark garments 1200
Sportswear 1200
Trainers* 1000
Outerwear* 800
Proofing 1000
Soft toys 900
First wash 1200
Pillows* 1200
Curtains 600
Starch 1600
To Next Page
