Programmable functions - Check/Cancel
To check the programmable
function:
To see if a selected programmable
function has been activated, carry out
Steps
1 to
6.
– If the “Rinses 1-2" light comes on ,
the relevant programmable function
is activated.
Press the I-ON / 0-OFF button.
This finishes the check.
To cancel the programmable
function:
Repeat the steps
1 to
9.
– In step
7 the “Rinses 1-2" light now
goes out.
– In step
9 (Press the I-ON / 0-OFF
button) the programmable function is
cancelled.
Programmable functions - Check/Cancel
46
To Next Page
Loading...
