Any residual water left in the
machine from the factory test-
ing process can be flushed
out as follows:
Do not put any laundry in the ma-
chine.
Add a small amount of detergent to
compartment j.
Turn on the machine.
Press the “Rapid wash” button.
Turn the programme selector to the
“COTTONS 60°C” programme.
Any residual water will be flushed
out during the programme.
Water hardness reminder
The amount of detergent needed to
wash clothes depends on various fac-
tors, including the water hardness in
your area. You can set the water hard-
ness dial in the detergent dispenser as
a reminder.
Turn the dial to the desired setting.
Use the tool supplied with the ma-
chine. It is located behind the deter-
gent drawer, on the left hand side
(see Cleaning and Care) water.
1 = soft, 4 = very hard
INSTALLATION INSTRUCTIONS
43
To Next Page
Loading...
