Miele WCA 030 Active - Programmable Functions; Opening the Programming Level; Selecting Programmable Functions

Programmable functions
72
The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
Opening the programming
level
Programming is carried out in 8 steps
(, ,...) using the sensor con-
trols.
Prerequisites:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
 Touch the sensor control and
hold it down whilst carrying out
steps  and .
 Close the washing machine door.
Wait until Start/Add laundrylights up
constantly...
 ...and then release the sensor
control.
will light up in the time display.
Choosing and selecting a pro-
grammable function
The number of the programmable
function will appear in the time display
as  and a number: e.g. .
 Touch the sensor control to select
the other programmable functions
one by one:
Programmable functions
 Keypad tone
 PIN code
 Indicator switch-off behaviour
 Memory
 Additional long pre-wash – Cottons
 Soak duration
 Gentle action
 Reduced temperature
 Water plus
 Water plus level
 Maximum rinse level
 Suds cooling
 Anti-crease
 Low water pressure
 Confirm the selected programmable
function by touching the sensor
control.