Miele WCA 030 Active - Programmable Functions; P14 Lock Code Setting; P22 Indicator Switch-off Behaviour

Programmable functions
74
 Lock code
The lock code prevents the washing
machine being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Options
 = Lock code switched off (fact-
ory default setting)
 = Lock code is switched on
Using the washing machine with a
PIN code
The code is 125 and cannot be altered.
 Switch on the washing machine.
The time display shows   and 
flashes to prompt you to enter the code.
 Touch the sensor control.
   appears on the time display.
 Confirm the number with the
sensor control.
The first number has been saved and
you can now enter the second number
using the sensor control.
 Enter the second and third numbers
and confirm the numbers with the
sensor control.
The lock function is deactivated. A
wash programme can now be selected
and started.

Indicator switch-off behaviour
The indicators will switch off after
15minutes to save energy.
Options
 = Off
The indicators will remain lit up
while the washing machine is
switched on.
 = On (factory default setting)
The indicators will switch off
after 15minutes if the pro-
gramme is started.
However, the indicators will re-
main lit up for 15minutes after
a Delay start time has elapsed,
after the end of a programme
or at the end of the anti-crease
phase.